Boat Motors, Parts & Acc. Wanted
|
Wanted: Need a bare block or power head for a 15 HP Suzuki 1992 or parts motor. Standard bore in good condition. Any help would be fine Contact Art at (813) 779-0309 or email: racerart@tampabay.rr.com Zephyrhills, Fl area Date; 6/16/09
Wanted: 1968 Mercury 65hp 650 lower unit
- 4 cyl. Contact Kelly at (717) 292-2234 or
via email:
mystufftoday@yahoo.com York, PA area Date: 6/15/09
Wanted I am looking for a good used
power head for a 1985 Evinrude 150 HP outboard motor
Contact Joed at (731) 733-1389 or email:
joebob1958@tds.net Decaturville, TN area Date: 6/14/09
Wanted gas can with fuel lines & connector for a 1954Johnson sea horse 5.5hp Contact Jeff at (860) 749-3178 or email: margaretbourne@cox.net Enfield, CT area Date: 6/14/09
Wanted Would like to buy a used 10 to 12 foot boat. (will use with trolling motor only).Contact Gene at (904) 845-2961 or email: gnchavis@yahoo.com Jacksonville, Fl area Date: 6/14/09.
Wanted I am in real bad need of a recoil
spring for a Gamefisher 1.2 or a tanaka tob-120 outboard motor. I may be willing
to buy complete motor running or not just to get this spring. Contact (801)
301-4848 or
via email:
magicmullet@hotmail.com Roy, UT area Date: 6/07/09
Wanted: I am looking for an older 3.8 OMC v 6 used but
running it came in a sumer set ski boat
Email: dadattude@yahoo.com
Wanted: I am looking for a 1955 Johnson tiller arm that fits
a 25 horse. Also the plate that goes behind the high and low speed adjustments.
Contact Ryan via email:
ryanbcarroll@msn.com
Stratford Iowa area Date: 6/7/09
WANTED GOODYEAR 1.5 Horsepower Outboard Engine for parts repair.I have a 1948 GOODYEAR 1.5 Horsepower outboard engine, in need of a power head. Water pump failed and the powerhead Piston + Cylinder were damaged. If you have such an engine, please let me know. Contact Bruce via email: brucempietro@yahoo.com Auburn Hills, MI area Date: 05/10/2009
Wanted: Face plate and or fuel mixture knob for a 1964 Evinrude Sportwin. Contact Jim at (714) 337-6979 or via email: j-lfenton@cox.net Date: 3/18/2009
Wanted: Need any info. on Neptune"Mitey-Mite 2" model 700 cdi outbd .Parts availability & sources, also manuals & part numbers. Any help greatly appreciated. Contact @ j_fine@bellsouth.net or [504]737-5657 Thanks, Jim !New Orleans, LA area Date: 2/26/09
Wanted: Fisher Pierce 85 hp outboard. Email:fildesjohn@hotmail.com
Wanted Any or all of a tilt&trim for a 1978 Johnson 115. Parts of mine are missing (pistons &---) Contact Paul at (903) 896-7544 or via email: leftlanepw@sbcglobal.net Edgewood, TX area Date: 12-24-08
Wanted:1963 Merc 850 for parts. Need gear casing. Contact James at (613)889-1990 or via email: mercury.vk9z@ncf.ca Ottawa, ON Date: 11/30/2008
Wanted: I am in need of motor covers
and gas petcock, rubber coupling and clamp for a 3.5 nissan or tohatsu.Any one
have them ? Or maybe a froze or shot motor with parts that I need Contact Art
(813) 779-0309 or via email:
racerart@tampabay.rr.com Zephyrhills,
F l Date: 11/24/2008
Thanks ~~ Art
Wanted: Looking for a good running 2
HP out board motor.Willing to pay up to $150.00. I live in the seacoast area in
New Hampshire. Contact Alan at (339)227-8674 or via email:
alanlavoie@hotmail.com
New Hampshire area
Date: 11/6/2008
Wanted: 1997 Mercury 175 Powerblock Jet Boat Engine 2 stroke Contact Monique at (248).875.1565 or via email: mdragoiu@comcast.net Waterford, Michigan area Date: 9/14/2008
Wanted: I'm looking for a reasonably priced carburator for an older '70's Merc 20 hp motor. Motor s/n is 3667651 Contact Jerry at (715) 758-2314 or via email: sapfamily@tds.net Date: 9/13/2008
Wanted: I am looking for a motor cowling(bonnet)for a 1968 18hp Evinrude. Pictures would be great. If you have 1 or can point me in the right direction towards one It would really help me alot. The easiest way to contact me is via E-mail( I work 3rd shift so E-mail is my lifeline to the "normal world" my E-mail is Bellyjim@yahoo.com Benton Harbor Michigan area Date: 9/10/2008
Wanted: Need a motor for a 1990 sea nymph 22' cuddy. has omc outdrive and bad 4 cylinder chevy engine. Would like a good used engine to replace it. Thanks, Mark Contact Mark at email: CabinCurandero@aol.com Date: 08-25-08
Wanted: Looking for a flywheel for a 1978 Johnson 25 also looking for a starter. Contact Kevin at (318) 381-1936 or email: katzrose@bellsouth.net Calhoun, la area Date: 8/25/2008
Wanted: I am looking for a points cam and keyway for a 9.9 chrysler. I think it's in the late 70's. Inside measurements are 13/16". Contact Art at 813-779-0309 or email: racerart@tampabay.rr.com Zephyrhills, Fl. Area 8/12/2008
Wanted: 1958 Mercury 55H. This would be 39.6 cid, 40+ HP, short shaft 15". I know it's a rare, hard to find. If it's together and in one piece and runs, offer will be generous. Would pay all shipping, etc. Contact Mark at 262 782-8529 or email: mas2jmg@peoplepc.com New Berlin WI area Date: 8/8/2008
Wanted I am looking for an owners manual for:
1983 Mercury 7.5 HP outboard and 1982 Johnson 2 HP outboard. Contact Dave at
(602) 721-9999 or via email: washingtonhuskies@huskies.com
Phoenix AZ area Date: 08/05/08
Wanted: I need a coil for a 1990 Force 9.9 and it is blue and
it's round with a small flat side. It has blue and brown wire plus spark lead in
back and it has a square hole in center for metal core. Contact Art at
(813)-779-0309 or via email: racerart@tampabay.rr.com
Zephyrhills, FL area Date: 8/0508
Wanted: Seeking a starter for a 68 Chrys 60 HP outboard. Starter is Prestolite MKW 4004. Contact Rich by phone (740) 680-5414 or email
RchFord@netzero.com Illinois area Date: 8/05/08Wanted: Looking for a complete transom mount assembly for a 1985 Mercury 25hp XD - Also, complete tiller steering assembly to convert remote to tiller steer on a 1990 Mercury 25hp.Contact Ron at (863) 398-5977 or via email:
ron_ruble@yahoo.com Dunnellon, FL area Date: 8/05/08Wanted: Need a prop and pin, etc. for a 1956
Model AD-10 Johnson 7.5hp motor.
Contact John at (214) 803-6295 or via email: jrbaabrj@yahoo.com
Mesquite, TX aea Date: 08/05/08
Wanted: Need info on a ignition module Sears gamefisher model 601951 5hp chicago11 serial #1140 j263819. It had a module prestolite 3405347. Is there a change up forthis number and who made this motor for sears and what year would it be? Contact Jerry at (306) 764-0937 or via email: jhills@skvelocity.ca Thanks Jerry SpruceHome Sask Canada area Date: 6/13/08
Wanted :1967 Mercury 650 4 cylinder ..Thrust Hub email me only please carie17@pacbell.net
Wanted; Mercury controller to fit a 1974 Mercury 85hp outboard, 7 pin. Contact Bob (440) 552-0331 or via email: bob51058@aol.com
Wanted: dead or alive Homelite, Bearcat, fisher pierce outboards ,parts, manuels, or any other stuff. if on boat will consider package purchase also will pick up thanks Contact Dwight at (941) 626-3110 or via email: promptlimo@embarqmail.com Port Charlotte, FL area Datge: 5/25/08
Wanted: Flywheel (P/N
580203) and coil for 1963 10HP Evinrude Sportwin Outboard motor or will sell
motor for parts or repair. Contact Jeff at (585) 723-4661
Date: 5/25/08
Wanted: Need gas connector and gas tank for older {60's} Evenrude 55 with Triumph on rear of engine cowling. Just bought it with a Glastron boat, trailer and am getting title now but needs work. Contact Al at (541)736-0680 or via email: unclealbe1@netzero.com Eugene, OR area Date: 5/25/08
Wanted: Looking for a good
running Mercury 850 XS short shaft (15") motor or any larger HP short shaft
Mercury Motor. Contact Tad at (231) 228-5337 or
via email:
carter@centurytel.net
Maple City, Michigan
area Date: 5/25/08
Wanted: starter motor for mercury 20 hp (model#200) 1970-73, starter part # is 50-47216a 2 new, used, broken, whatever, will pay for shipping. Contact Steve at (502) 599 1404 or via email: direwolfe@insightbb.com Louisville, KY area Date: 5/25/08
Wanted: I am looking for a tecumseh carburetor for a Sears Game Fisher 3.5hp outboard made by Eska. The model number of the engine is 217-598-60. Contact Scott at (240) 217-6917 or via email: scott.allen@myactv.net Boonsboro, MD area Date: 5/6/08
Wanted parts for a 1953
Scott Atwater Mod# 335. Need fuel line with connectors, prop 2 or 3 blade,
recoil rope, and any usable power parts. Phone 810 240 1135 or
via email:
fred5490@yahoo.com in MI. area Date: 4/20/08
Wanted: CDI for 1986 Suzuki DT150 Super Boat Engine Part # 32900 87D20 Part number may have been updated. Contact via phone number (570) 366-1176 or via email: caderhold1@verizon.net Date: 4/20/08
Wanted: Elgin 2 HP Air Cooled Gas Tank Needed. This Motor was made from 1948 to 1958. Will also accept a Parts Motor. My Motor is like New, but someone ruined the Gas Tank with a Welding Torch, while trying to modify it for another Motor. Will pay good money for a Nice Clean GAS TAnk. Contact Steve ONeill 847-776-1817 or via email: steveoneill5@aol.com Palatine, Illinois area Date: 4/20/08
Wanted: 1987 mariner 40hp outboard complete lower unit or gears kit Contact Luis Enrique at (787) 709 8493 or via email: pescadorenelmar@yahoo.com Juana Diaz, PR Date: 4/20/2008
Wanted: 90 Yamaha looking for top end motor parts pistons cylinders. Contact Trent at (306) 934-7038 or via email: rimes02@hotmail.com
Wanted: I need a carburator for a Sears Gamefisher 1.75 hp boat motor. Contact James at (704) 923-0829 or via email: toledamcgee@bellsouth.net Dallas, N.C. area Date: 3/25/08
Wanted: Looking for a tiller kit for a 1959 Super Seahorse 35hp model # RDS-21 Part #377949. Contact Tony at (817) 685-8482 or via email: tonygraham@netzero.com Bedford Texas area Date: 03/13/08
Wanted: 3- 7.5 HP motor
used or new. working. I am in San Antonio Texas and would prefer to pick up the
motor, so Texas only. Contact Klink at (210) 499-0304 or
via email:
klink.jr@gmail.com San
Antonio, Texas area Date: 3/13/08
Wanted: Looking for a lower unit for 1997 75hp Force. Contact via phone (304) 269-6449 or via email: mccallemail@rapidcable.com West Virginia area Date: 3/13/08
Wanted: Power pack 1968 85hp Evinrude. Contact Larry at (409) 925 7561 or via email: larrywoitena@bp.com Santa Fe Texas area Date: 3/4/08
Wanted: 1995 5HP FORCE-- I need a prop shaft and small clutch spring. Contact Dan at (636) 399-3227 or via email: payneddk@aol.com Washington, MO area Date: 3/4/08
Wanted: 1962 Evinrude 5 1/2HP Fisherman - I need a shift lever and a high speed adjustment knob. Contact Dan at (636) 399-3227 or via email: payneddk@aol.com Washington, MO area Date: 3/4/08
Wanted: I am looking for
the lower unit casing for a 1997 nissan 90 hp motor I am only needing the casing
but if gears are included that is fine. Contact Markee at (270) 564-1560
or via email:
msinocnt4u1973@yahoo.com Calvert City KY area Date:
2/17/2008
Wanted: Looking for a hood
that will fit a 1981 Johnson 25 hp electric start. Contact Rick at (618)
928-1525 or via email:
ricklents.sumner@verizon.net
Bridgeport, IL area
Date: 2/17/08
Wanted: I am looking for an ignition coil for 1991 9.9 hp gamefisher (chrysler) before Mercury bought them out. The orginal part # was 712475 or it could of been F712475, I have tried every thing, I so far I can not find this coil, any body got any ideals. Contact Terry at (304) 773-5390 or via email: gettrrdunn@yahoo.com Mason WV area Date: 2/6/08
Wanted: I am looking for a foot control trolling motor. Any trust will do! Contact Danie via email: Danie Hattingh Date: 1/27/08
Wanted: I am looking for a newer 4 stroke Yamaha outboard motor anywhere from 3 horse on up to a 115. If you have something please call me at 319-981-7653 and if you give me a good deal I might invite you to my cabin in Canada for the best fishing you have ever had!! Thanks Jim.
Wanted: Looking for older racing outboard motors from the 1950 through the 1970 Any Chrysler racing motors or parts, Evinrude or Johnson motors and racing parts. Mercury racing motors and parts, Quick silver Lower Units, Propellers. Looking for a C or D runabout also C or D Hydro. Contact Jerry at (248) 634-8768 or via email: gvanconant@comcast.net Davisburg, MI area Date: 1/27/08
Wanted: 1985 Johnson or Evinrude 150 or 175 hp. 25" shaft lb. email: ib jensen for more information. Date: 1/27/08
Wanted: I need a complete lower unit for a 9.9 2-stroke Mercury. Contact Gary at (518) 359-2018 or via email: GBlack148@aol.com Upstate, NY area Date: 1/7/08
Wanted: I need two coils for a 1954 Elgin 7.5. h.p. outboard. Contact Jeff at (812) 568-1005 or via email: jeffreylittle@insightbb.com Evansville, IN area Date: 01/01/08
Wanted: Looking for parts
or whole motor; Lauson 1 or 2 cylinder outboard motor. Contact John at (253)
476-0758 or via email:
jonnyzhome@msn.com
Tacoma, WA area Date: 01/01/08
Wanted: I am looking for a Tilt and Trim unit for 1989 Johnson 48 Hp Current motor has manual tilt. Contact Mark at (937) 584-2410 or via email: fishcrazy1@verizon.net Sabina, OH area Date: 01/01/08
Wanted: Looking for a Mercruiser 140hp 4cy. to put in a mimi rod tractor iam building. in MO. or KS contact Donald at (816) 450-8819 or via email: swani1954@hotmail.com Dearborn, MO area Date: 12/20/07
Wanted: I would love to
find the Elgin logo for a 40hp. motor. The boat is a 1962 model. Please
contact Lon by email at
ldgonce@bellsouth.net or call (828) 38-0824.
Date: 12/20/07
Wanted: Need carburator
for a 9.9hp Nissan, mid 80s also tiller handle for same motor. Please contact
Mike at (207) 286 7827 or via email:
chickadeedeedee@verizon.net
Saco, ME area Date: 12/20/07
Wanted: Fuel pump for late
1980's model 75 HP Evinrude motor (2 stroke engine). Contact Paul at (636)
448-3203 or via email:
pfarrar2@juno.com
Jefferson City MO area Date: 12/1/07
Wanted: I need a prop and
a rubber clutch for a 2 HP Johnson. Mod. # J2RCOC. Ser. # B104451 . I think it a
1985. Contact Art at (813) 779-0309 or
via email:
racerart@tampabay.rr.com
Zephyrhills , Fl. Area Date: 12/01/2007
For Sale: I have a 1970 mercury 4 horse motor my brother put a new water pump on it for me but when we tried starting it it has no spark, he said it may either be coil or stator???i have the motor and will probably never use it so if you need it for parts or if you have a coil and or stator, come get it for $75.00 it used to run fine for my pap and the compressions good ,but it sat for a few years Contact Barrett at 570-339-3286 or via email: aprilandbarrett@peoplepc.com Mount Carmel, PA Date: 11/11/07
Wanted: I'm looking for a
clean good running used 1956-1958 5.5 Evinrude outboard. Contact Rich at (732)
967-3635 or email:
Tash329@aol.com
Keyport, NJ area Date: 11/11/07
Wanted: I’m looking for a lower unit for a Johnson sea-horse Model-6RL75 R. Contact Al at (209) 656-6827 or email: alomeli209@aol.com Delhi, CA area Date: 10/28/07
Wanted: I need a good power head for a 1996 Mercury 25hp compression must be GOOD Contact Frank at (318) 226-1753 or via email: frengland@cmaaccess.com Shreveport LA area Date: 10/21/07
Wanted: A good lower unit
for a 3.6 Mercury single cylinder, about a 1978. The one with a wrap around tube
carrying handle. Contact Art at (813) 779-0309 or
via email:
racerart@tampabay.rr.com Zephyrhills, FL area
Date: 10/4/07
Wanted: A throttle linkage
control synchronous cam for a '67 28hp McCulloch outboard motor, SR# 80374-554.
I can send picture of broken part. Contact Bill at (360) 642-3949
or via email:
wstoltz@centurytel.net Long Beach, WA area Date: 10/4/07
Wanted: 1954 Elgin Boat
Outboard Motor Parts List 2 HP Model # 571 58211and need some mag parts.
Contact Dan at (360) -274-7536 or via email:
dlclark@isp.com
Washington area Date: 9/21/07
Wanted: I am looking for a lower unit and prop for a 1958 10hp Johnson Model# QD-19 or if possible the gears that are in the lower unit!!! Also any other parts that are interchangeable! Contact Eloy via email: e.posada@charter.net Kalamazoo, MI area Date: 9/21/2007
Wanted: Fisher Pierce Bearcat 85, Homelite 55 outboard motors, parts, leads. I need both 85hp and 55hp motors or parts Contact Bill at (360) 678-4235 or via email: Outboardr@yahoo.com Whidbey, WA area Date: 9/16/2007
Wanted: Homelite Bearcat parts, manuals, motors Contact Dwight via email: promptlimo@embarqmail.com Date: 9/13/07
Wanted: I am
looking for a electronic manual and wiring schematic for a Johnson 1970 85
horsepower force outboard motor Contact Max via email:
Maxgretel@hotmail.com
Date: 9/12/2007
Wanted: My Uncle
gave me a Sears Ted Williams 7.5 HP outboard motor.
Serial # 66600717 3652
Model # 574.60607
The fuel line connection on the motor looks like a 1/4" tube with a tee set back about a inch. I am not familiar with this. I need a tank, line & connections for the engine. Contact Russ at (630) 514-4503 or email: plmconcrete@sbcglobal.net Addison, IL area Date: 9/12/07.
Wanted: I need a lower unit for a Mercury 9.9 Contact Gary at (518) 359-2018 or via email: GBlack148@aol.com Up State New York, NY area Date: 9/4/07
Wanted: Need a carburetor for a 1971 Ted Williams 5hp. and a prop if you have one. Contact via email: jcfire9308@hotmail.com Holden, MO area Date: 9/4/07
Wanted: I looking for a motor cover (cowling) 1968 Johnson Seahorse 9.9 Mine blew off going down the freeway, dammit. Please help me locate a replacement, thank you. Contact Michael at (408) 509-7979 or via email: mwkerrebijn@msn.com San Jose, CA area Date: 8/20/2007
Wanted: Looking for a
flywheel for a Gamefisher 15hp model 225.581501. Contact Jim at (520) 722-5592
or via email:
jamjachealy@msn.com
Tucson, AZ area Date: 8/20/07
Wanted: Looking for a
starter for 1977 Johnson or Evinrude 35hp motor, with mounting bracket included.
Contact Lee at (319) 365-9233 or email:
lsmann2@yahoo.com
Cedar Rapids, IA area Date: 8/20/07
Wanted: Looking for a cowling for a 1963 (I think) Chrysler 6hp outboard boat motor. Lost mine on the highway. Motor runs great, but I need a new cover. Please reply to my email if you have one, and what you need to get for it. Contact Jeff via email: pattman123@gmail.com Oshkosh, WI area Date: 8/8/07
Wanted: Looking for a
carburetor for a 1987 40 HP Mariner outboard engine. Need the full upper unit.
Contact Heather at (517) 282-6348 or email:
vezinohe@hotmail.com
Sunfield, MI area Date: 8/8/07
Wanted: Need lower unit
for a 1981 Suzuki 9.9 or would like to sell my complete upper and great running
motor. Contact Chris at (501) 258-0153 or email:
cc3079@att.com
Conway, AR area Date: 8/5/07
Wanted: I'm looking
for For all of the ignition parts for a Honda BF100 (10 HP ) In the late 70's . Any help would be appreciated, Thanks
Zephyrhills, Fl. Area Date: 8/5/07
Wanted: 1980 thru 1982
Suzuki model DT9.9 outboard motor CDI unit. Suzuki part number is 32900-93500
Contact James at (214) 926-8687 or email:
ramjet@sbcglobal.net
Waxahachie, TX area Date: 8/5/07
Wanted: I need a parts
motor or a good lower unit for a 3.6 HP Mercury outboard motor, the one with the
wrap around tube carrying rail, single cylinder. I think the four hp in the same
style with wrap around tube rail is the same. Zephyrhills, FL area Date:
7/23/07
Wanted: I am looking for points for a 7.5 HP Sears Ted Williams 2 cylinder (Elgin Sears) for my father who would like to restore this engine. Model # 575-59521. Any leads on where to find these would be appreciated. Contact Heather at (920) 639-9244 or email: pickles2eat@netscape.net Appleton, WI area Date: 7/17/07
Wanted: Need a electric starter and brackets to fit a 1981 Evinrude 25 hp motor (came with rope start) could use just the brackets if you have them. Contact Bill at (325) 944 4818 or via email: wbeckett1@verizon.net San Angelo, TX area Date: 7/15/07
Wanted: I need a good lower
unit for a Mercury 3.6 HP. 1978. Its the one that has an on board tank and a
tube type carrying handle that wraps all the way around the motor.
Zephyrhills, FL
area Date: 7/15/07
Wanted: I need a lower unit for a 9.9 mercury, 2 stroke. Contact Gary at (518) 359-2018 or via email: GBlack148@aol.com Up State New York, NY area Date: 7/14/07
Wanted: I need
parts/overhaul./repair manual for 1962 Gale Sovereign 60hp outboard. Contact
Brian at (513) 261-8458 or via email:
BMOSES4@cinci.rr.com
Middletown, Ohio area Date: 07/07/07
Wanted: I am looking for
used cowling for my Mercury XD25. I think its 87... Also would fit any XD from
15 to 25. Contact Chris at (519) 496-2758 or
via email:
chrisisonlineagain@hotmail.com Ontario, Canada area Date: 7/7/07
Wanted: Looking for a
parts motor a 1986 DT 150 Suzuki Super Six. Contact Randy at (870) 748-2539 or
via email: randyrenaeduck@yahoo.com
Eldorado, AR area Date: 7/7/07
Wanted: Looking for old racing outboards from the 50 and 60, 105 of 135 Chrysler with racing lower unit, Mercury MK30H, MK40H, MK55H, Evinrude 35SS or 45SS, Johnson or any racing parts. Lower Units, Propellers. Looking fo a C or D runabout also C or D Hydro. I'm going through my second childhood at 70 and what show my grand children how the old boats run. Contact Jerry at (248) 634-8768 or via email: gvanconant@comcast.net Davisburg, MI area Date: 7/7/07
Wanted parts for 1973 Mercury 9.8HP model 110. Really need a lower unit. Contact me if you know where I can get one of these. Also would like to get owners manual and repair manual. Contact Colleen at (815) 467-8694 or via email: kemcolleen@juno.com Minooka, IL area Date: 6/21/07
Wanted: I am looking for a 90's johnson 225 3.0 engine block. Contact Randy at (717) 495-6651 or email: rndy42583@aol.com York, PA area Date: 6/21/07
Wanted: IMPELLER for a
late 70's 7.5hp Clinton outboard, short shaft. Model K7515000B, serial
#1500127. Also, does anyone have a source for any Clinton outboard parts?
Please share any ideas - for instance, will another motor brand's parts adapt to
a Clinton? Contact Roger at (509) 710-1470 or email
havensdrywall@msn.com
Spirit Lake, ID area Date: 6/21/07
Wanted: We are in need of a
lower unit for a 1999 Honda 130 outboard motor. At a reasonable price or
free... Contact Patricia at (504) 416-3370 or email:
pfrickey@bellsouth.net
Marrero, LA area Date: 6/13/2007
Wanted: I am looking for
the owners manual or a 1973 18hp Evinrude boat motor not the repair manual.
Contact James at (541) 440-8461 or via email:
crazzyman8888@juno.com
Roseburg, OR area Date: 6/13/07
Wanted: Looking for manual
and wiring diagram for a 1970 era Montgomery Ward Sea King 16' Johnson 40 horse
electromatic outboard Contact Tony at (708) 543-9752
or via email:
suebtony@aol.com Crestwood. IL area Date: 6/13/07
Wanted: 987 or older 3.0 OMC Cobra motor Contact Mike at (989) 435-3106 or email: mks_m45@mwisp.net Beaverton, MI area Date: 6/13/07
Wanted: Looking for a
recoil spring for a 1950\51 Johnson tn26 part #0276510 if you have one or know
where I can get one please respond to
Homer, MI area Date: 6/13/07
Wanted: Looking for clutch
plate for 1972 Sea King motor. Mine is worn so slips out of gear. Contact
Brenda at (815) 831-1306 or email:
bcarlson@aeroinc.net
Rock City, IL area Date: 6/13/07
Wanted: I am looking for homelite outboard motors either 55hp or 85 hp. Contact Jeff at (319) 462-4028 or via email: jtluke1106@aol.com Anamosa, IA area Date: 6/3/07
Wanted: Looking for free parts for a Clinton k700. Need any and all parts and any manuals some one might have. Contact Patrick at (443) 416-3235 or via email: marycool71@msn.com Dundalk, Maryland area Date: 5/22/07 THANK YOU
Wanted: I am looking for a manual and wiring schematic for a 1988 15 horsepower force outboard motor Contact Jim at : 1- 705- 757- 2171 or via email: scripps@onlink.net Loring Ontario Canada Date: 5/22/07
Wanted: I am looking for a Transom mount for a 3.5hp Game Fisher motor. Contact Jackie at (706) 897-2536 or via email: crackerjack620@yahoo.com Hiawassee, GA area Date: 6/3/07
Wanted: Prop for Evinrude 3.3 hp outboard Model#E3rdede Contact Rick at (320) 420-7882 or via email: rrydlund@peoplepc.com Stanchfield, MN area Date: 5/22/07
Wanted: I need a lower unit for 1971 Sea King 6 HP boat motor. Working condition Contact Tim at (518) 237-8689 or via email: tfont429@nycap.rr.com Cohoes, NY area Date: 5/22/07
Wanted: I am looking for both a low speed and high speed adjustment knob for a 1962 Johnson 10 HP Sea Horse outboard. Contact Joe at (731) 694-2937 or via email: jdhardy61@juno.com Halls, TN area Date: 5/22/07
Wanted: Outboard 70 to
100hp or up to $500 must be in maritimes Contact Jeramie at email:
jeramiekeenan@hotmail.com
Moncton New Brunswick, Canada area Date: 5/8/07
Wanted: I am looking for an
outboard between 30 to 50 horsepower. Must be a short shaft and have power tilt
and trim. Contact Steve at (518) 891-3603 or
via email:
sft1951@adelphia.net Saranac Lake, NY area
Date: 5/1/07
Wanted: Electric starter for a 1964 9.5 Johnson. Contact John at (610) 266-5872 or via email: augie17@rcn.com Catasauqua, PA area Date: 4/20/07
Wanted: Wanted - lower unit
(20 inch shaft) for 1994 C25 Yamaha 2 stroke. Contact David at (210) 259-3687
or via email:
davidpohler@sbcglobal.net
San Antonio, TX area Date: 4/19/07
Wanted: Wanted Meccury Mark 30h or 40h outboard motor. Contact Clem at (718) 684-2221 or via email: jacks305@gmail.com Bronx, New York area Date: 4/19/07
Wanted: I Need a carburetor for an Eska 3 H.P. boat motor. Contact Jack at (304) 462-5063 or email me cbrannon@rtol.net with price. Glenville, WV area Date: 4/15/07
Wanted: I am looking for a
1957 Evinrude 5.5 Fisherman. At present, I have one that is seized up and
looking for one that is running. Either Johnson or Evinrude from 1955-57 .Any
help would be deeply appreciated. Arkansas City, KS area Date: 4/15/07
Wanted: Needing complete
lower unit for a 9.9 mercury, 2-stroke. Contact Gary via phone (518) 359-2018
or via email:
GBlack@aol.com
Up State New York area Date: 4/09/07
Wanted: Looking for old
boat motors under 10 horsepower. Any condition ok. Not interested in any Sears,
Elgin, McCulloch, Scott, ESKA, Clinton. Particularly interested in any
UNRESTORED Waterwitch, Indian, Caille, Flambeau, Lockwood, Martin,
Johnson, Neptune, Wizard or Evinrude. Contact Jerry at (630) 231-0174 or
via email:
studenut8@comcast.net
West Chicago. IL area Date: 4/09/07
Wanted: two (2) items.(1) Need owners manual in good shape for a 1956 Johnson QD17 ten horse outboard motor. (2) WANTED-Sea Horse Medallion for the front cover on 7.5 horse Johnson AD12 (1958) If it's from a 57 no problem. Just as long as it fits in the 2 screw holes in the cover. Call or email price and photo...Contact Jerry at (630) 231-0174 or via email: studenut8@comcast.net West Chicago, IL area Date: 4/09/07
Wanted: Looking for a tilt
an sweviel for an 86 Mercury 25hp xd motor mine is junk so i need a new one or
if you have any misc. Parts let me know what you have.
Contact Mike at (414) 574-1216 or email:
BISKET822@HOTMAIL.COM Milwaukee, WI area Date:
4/3/07
Wanted: I need a propeller for a Clinton (Beaver) 7.5 hp. outboard, Model number K7516114A, Serial No. 1600405. Please contact me by e-mail at tjsata@sbcglobal.net or by phone at (734) 591-6425 if you have a new or used prop or can direct me to someone who may have the correct prop. Livonia, MI area Date: 4/3/07
Wanted: Fuel Line Connector for 1959 Johnson 10 HP outboard motor. Contact Rick at (319) 395-0952 or email: rickmartin412@aol.com Cedar Rapids, IA Date: 4/3/07
Wanted: Need lower unit for 1960 Johnson 40 hp. super quiet also need controls for 1970 Johnson 65 hp. super seahorse with electric shift. Contact Mike at (740) 447-1841 or email: rktpwrd86@yahoo.com Coolville , OH area Date: 3/28/2007
Wanted: I am looking for a 20-30 horse motor, any kind, preferably with the tiller arm. I don't care if it’s running or not just need something cheap. Contact Brandon at (606) 232-2357 or email: kybuckhunter@adelphia.net Flatwoods, KY area Date: 3/28/07
Wanted: To BUY Lower end
unit for 1982 175 hp Evinrude V6 Pay Cash plus shipping Contact Billy at (850)
455-9500 or email me at
bpate7@bellsouth.net
Pensacola, FL area Date: 3/21/07
Wanted: am looking for a
bracket that holds the starter gear that goes to the flywheel on a pull start
1960 Chysler SeaKing 15 hp boat motor. Contact Tony at (580) 276-6758
or via email:
jats63@brightok.net
Marietta, OK area Date: 3/19/07
Wanted: Looking for a 1974 85-115 hp Evinrude power trim and tilt unit. Must be working. Contact John at at (315) 589-2357 or email: jjans4@rochester.rr.com if you have one w/price. Date: 3/19/07
Wanted: I am looking for a
good used lower unit for a 1982 Johnson \ Evinrude 50 hp. Contact Cash at
( 304) 269-6449 or via email:
mccallemail@earthlink.net
Jane Lew, WV area Date: 3/17/07
Wanted: OMC - Evinrude/Johnson
40 HP geared flywheel - OMC P/N's 581542 or 581345 Contact Pete at (815)
922-0327 or via email:
hpete@compuserve.com
Illinois area Date: 3/17/07
Wanted: Outboard motor, 40+ HP with tilt and trim. NO project motors please! Call (402) 595-1216 during day or (402) 267-5248 evenings and ask for Art or email: waleygator@yahoo.com Weeping Water, NE area Date: 3/17/07
Wanted: I am looking for a propeller for my 1955 Johnson Sea Horse 10HP QD-16. Contact Ross via email: rbird@qortek.com Williamsport, PA area Date: 3/12/07
Wanted: Wanted Tanaka 550
TOB Propeller and gear cover, only made one year then discontinued. Are there
any parts that would interchange with this motor?
Contact Harvey at (801) 627-4539 or via email:
bubbagump73@msn.com Ogden, UT area Date: 3/12/07
Wanted: Needing a complete
lower unit, for a 9.9 Mercury, short shaft. Contact Gary at (518) 359-2018 or
via email: GBlack148@aol.com
Up-State New York area Date: 3/12/07
Wanted: Looking for a prop for my 1957 mercury mark 10hp any one has any or know someone please contact me! can't get a rubber hub for it. Contact Mike at (480) 813-8007 or via email: aelkhunter@hotmail.com Mesa, AZ area Date: 3/7/07
Wanted: I am looking for a flywheel and electric starter
for a 35hp Mercury, 1988. Contact Howard at (630) 834-0599 or via email:
hhermansen@comcast.net
Elmhurst, IL area Date: 3/7/07
Wanted: I am looking for a motor cover for a 1969 Chrysler
105hp outboard motor. Contact Michael at (928) 337-7662 or email:
mcirivello@yahoo.com
AZ area Date: 3/7/07
Wanted: 1964 Mercury 50 H.P.
outboard. Must be complete and as close to running condition as possible.
Contact Ron at (705) 734 0160 or
via email:
Citation.01@hotmail.com Barrie ON Canada area
Date: 3/4/07
Wanted: I am looking for an ignition coil for a 1970 Evinrude 6 HP Fisherman outboard motor model series 6003B. Contact Tomas (Phone: 00442841738157) or email: odubhain@utvinternet.com Rostrevor, Ireland Date: 3/4/07
I have 16 50's vintage
outboards ranging from 2hp-12hp for sale as a lot. I do not want to sell them
per motor because of the time it would take to ship. I restored them so these
motors are pretty mush complete and as for as parts are concerned. Contact Paul
(251) 962-7433 or via email: pgibson@gulftel.com
Pensacola, FL area
Date: 3/4/07
Wanted; 1962 Mercury Merc
1000, 100 HP. six cylinder outboard. Must be complete and in good condition –
Running. Contact Ron at (705) 734 0160
or via email:
Citation.01@hotmail.com Barrie, ON Canada area
Date: 3/4/07
Wanted: 14' Crestliner Mustang Boat in good condition. Preferably 1964, blue deck on white hull with white apron in front of windshield. Will consider all and any other years and colors. Contact Ron at (705) 734 0160 or email: heeley_1@sympatico.ca Barrie, Ontario, Canada area Date: 2/13/07
Wanted: I am looking for
coil ring piston 1956 Johnson outboard motor. Contact Charlie at (603) 435-9307
or email: www.daddyfatcowof5@verizon.net
Manchester, NH area Date: 2/13/07
Wanted: I need parts for a
Chrysler 12.9 HP outboard engine. Model # l22 HA. Serial #3664. I will buy
junkers in 9.9 or 10 HP. Contact Joe at (608) 752-1955
or email:
jputsch@milwpc.com
Janesville, WI area
Date: 2/13/07
Wanted: Evinrude/Johnson outboards from 5.5hp to 35hp from
1957 to 1980. Parts,basket cases or running motors. Contact Rich at (732)
978-3635
or via email:
Tash329@aol.com Keyport, NJ area Date: 2/4/07
Wanted: Forward drive gear
for lower unit on 1984 Mercury Mariner (Japanese) 60HP 3 cyl. Contact Tracey at
(918) 640 8394 or via email:
traceymarek@yahoo.com
Tulsa, OK area Date: 2/4/07
Wanted: I am looking for a late model 90 HP outboard motor. 2 stroke preferred. New, slightly used, rebuilt, or used. ONLY a good running motor with good compression in all cylinders and no leaks. Contact Nick at (586) 484-2085 or via email: bentcreekflyrods@comcast.net Detroit, MI area Date: 2/4/07
Wanted: Starter for a 470 mercruiser on my 1982 viking deck boat. It's a 4 cly i/o. Contact Art via email: saber1_1@netzero.com Pt. Charlotte, FL area Date: 1/25/07
Wanted: POWERHEAD FOR MERCURY 18 HP OUTBOARD. SER. 5918184 SHORT TILLER HANDLE. 1981 YEAR. NEED COMPLETE POWERHEAD OR AT LEAST GOOD BLOCK. MY BLOCK CRACKED AND IS NO GOOD. SOME PARTS ARE OK.SEVERE OVERHEAT. Contact Gary at (231) 269-3111 or email: gkplank@acegroup.cc Buckley, MI area Date: 1/25/07
For Sale: I have a 1939 Evinrude Ranger 1.1 hp for sale. Motor is complete and has compression. The bottom fin by the prop has either been worn off or broke off but that is the only damage I can find other than a few dents on the fuel tank. 90% of the original paint on the tank is still there. If you are interested, I can send photos for you to see. Asking price is $250.00 plus any shipping costs. Contact Tina at (330) 223-1111 or email: tjenks37@localnet.com Kensington, Ohio area Date: 1/18/07
Wanted: JOHNSON 40HP POWERHEAD TO FIT MY 1959 35HP JOHNSON SUPER SEA HORSE 1960 TO 1964 WILL FIT BASE GASKET # 306735 OR 31137 WOULD LIKE NOS IF POSSIBLE. Contact Gerald at (810) 367-3394 or email: farmboy196@hotmail.com St. Clair, MI area Date: 1/18/07 THANK'S
Please let us know if
you have any problems with addresses or phone numbers.
Thank you The Boss